Heat-shrink wire solder connector SWSC from polyethylene with adhesive layer (for crimp)
Designation: Heat-shrink wire solder connector SWSC from polyethylene with adhesive layer (for crimp). Consists of heat-shrinkable tube made of high-density polyethylene (HDPE) with inner surface of hot-melting glue from polyamide (PA, Nylon).
Used for fast connectors joint under mounting or reparation works in automobile industry, shipbuilding, heavy engineering, electrotechnics etc. Nominal voltage — up to 1 kV.
- Outer base from polyethylene of high density provides reliable protection from abrasion and external influence.
- Hot-melting glue provides good water resistance of the product.
Non-standard method of wire connection is determined by special constructive structure:
- for visual control of mounting process transparent material of isolation is used;
- in the middle of connector is placed crimp from low-temperature tin-lead alloy solder wire;
- adhesive lines from both sides of inner surface of heat-shrinkable tube provide reliable sealing after shrink
|
Specifications |
Test method |
Data |
|
Electrical |
||
|
Dielectric strength |
ASTM D2671 |
>20 kV/mm |
|
Operating temperature |
RT-1404 |
600V |
|
Loss of voltage in connection butt |
RT-1404 |
Less 2,0 mV |
|
Volume resistivity |
ASTM D2671 |
>1014 Ω·cm |
|
Physical |
||
|
Breakdown strength |
ASTM D2671 |
Not less 30 MPa |
|
Breakdown elongation |
ASTM D2671 |
More than 400 % |
|
Tensile strength after aging |
ASTM D2671 |
Not less 30 MPa |
|
Relative elongation after aging |
ASTM D2671 |
More than 300 % |
|
Density |
ASTM D792 |
1,01 g/cm3 |
|
Heat shock |
+200 °С during 4 hours |
no damage of outside cover, no leak |
|
Flexibility under low temperatures |
-55 °С during 4 hours |
No crack |
|
Chemical |
||
|
Corrosion |
ASTM D2671 |
Passed |
|
Water absorption |
ASTM D570 |
<0,5 |
|
Shrinking temperature |
- |
From +150 °С to +200 °С |
|
Operation temperature |
- |
From-55 °С to +125 °С |
|
Similar products |
- |
Raychem D-106-0001, D-106-0002, D-106-0003 |
Product Size:
|
Product name |
Color |
Diameter, mm |
Wire size |
|
|
AWG |
Core section, mm2 |
|||
|
SWSC -1 |
red |
4,3 |
22-18 |
0,5-1,0 |
|
SWSC -2 |
blue |
5,2 |
16-14 |
1,5-2,5 |
|
SWSC -3 |
yellow |
6,4 |
12-10 |
4-6 |
For mounting is needed special crimping instrument, heater (electric or gas for upper cover shrink), instrument for wire stripping.
